| MODEL | CONFEDERATE X132 HELLCAT SPEEDSTER 2015 |
| Year | 2015 |
| Engine Type | 56 degree V-twin, four-stroke, X132 Copperhead, DOHC, one-piece forged crank |
| Displacement / Capacity | 2163 cc / 132 cu in |
| Bore X Stroke | 111.8 x 111.8 mm / 4.4 x 4.4 in |
| Compression Ratio | — |
| Cooling System | — |
| Max Power | 87.6 kW / 120 hp |
| Max Torque | 189.8 Nm / 140 ft-lb |
| Ignition | — |
| Induction | Fuel injection, single side-draft intake with 58 mm throttle bodies |
| Start System | Electric |
| TRANSMISSION SPECS | |
| Lubrication | — |
| Gear Box | 5-speed |
| Clutch | — |
| Final Drive | Shaft |
| CHASSIS SPECS | |
| Frame | 3 in 120-wall hard steel backbone, 2 in 120-wall steel downtube, hand TIG welded |
| Front Suspension | Custom 48 mm fork |
| Rear Suspension | Custom Race Tech coil-over shock, rebound and compression adjustable (low and high speed) |
| Front Brakes | Dual discs, dual Beringer 4-piston Aerotec radial calipers, floating stainless steel discs |
| Rear Brakes | Single cross-drilled Brembo stainless disc, 2-piston Brembo monobloc caliper |
| DIMENSION SPECS | |
| Overall Length | — |
| Overall Width | — |
| Overall Height | — |
| Seat Height | 724 mm / 28.5 in |
| Wheelbase | 1608 mm / 63.3 in |
| Ground Clearance | — |
| Dry Weight | 226.8 kg / 500 lbs |
| Wet Weight | — |
| WHEEL SPECS | |
| Front Tyre | 120/70-ZR18 |
| Rear Tyre | 240/40-VR18 |
| FUEL SYSTEM | |
| Fuel Capacity | 17.98 Litres / 4.75 US gal |
| Fuel Consumption | — |
| Top Speed | 277.1 km/h / 172.2 mph |
A solo-seat, limited run of 65 bikes built around the 132 cubic inch Copperhead V-twin. It pairs a hand-welded steel backbone frame with carbon fibre wheels and radial Beringer brakes, and finishes in black. The Speedster is a stripped, single-seat take on the X132 Hellcat, aimed at collectors and performance riders.
