| MODEL | HONDA CL 360 1974 - 1976 |
| Year | 1974 - 1976 |
| Engine Type | Four stroke, vertical parallel twin, aluminium alloy, OHC, 2 valves per cylinder |
| Displacement / Capacity | 357 cc / 21.7 cu in |
| Bore X Stroke | 67 x 50.6 mm / 2.64 x 1.99 in |
| Compression Ratio | 9.3:1 |
| Cooling System | Air cooled |
| Max Power | 24.8 kW / 34 hp @ 9500 rpm |
| Max Torque | — |
| Ignition | Contact breaker (points) |
| Induction | Carburettor |
| Start System | Electric & kick |
| TRANSMISSION SPECS | |
| Lubrication | Wet sump |
| Gear Box | 6 Speed |
| Clutch | Wet, 8 plate, 140 mm |
| Final Drive | Chain |
| CHASSIS SPECS | |
| Frame | Pressed/tubular semi-double cradle |
| Front Suspension | Oil damped telescopic fork |
| Rear Suspension | Swing arm with pressurised gas damped shocks |
| Front Brakes | 180 mm drum, two leading shoe |
| Rear Brakes | 160 mm drum, single cam |
| DIMENSION SPECS | |
| Overall Length | 2040 mm / 80.3 in |
| Overall Width | 820 mm / 32.3 in |
| Overall Height | 1130 mm / 44.3 in |
| Seat Height | 810 mm / 31.9 in |
| Wheelbase | 1300 mm / 53 in |
| Ground Clearance | — |
| Dry Weight | — |
| Wet Weight | 178 kg / 392.4 lbs |
| WHEEL SPECS | |
| Front Tyre | 3.00-18 |
| Rear Tyre | 3.50-18 |
| FUEL SYSTEM | |
| Fuel Capacity | 11 Litres / 2.9 US gal |
| Fuel Consumption | — |
| Top Speed | — |
Photo: Dakota Pilot, CC BY-SA 3.0, via Wikimedia Commons
Photo: Mick from Northamptonshire, England, CC BY 2.0, via Wikimedia Commons
The CL360 took over from the CL350 for 1974, using the bigger-bore 356 cc twin and six-speed gearbox of the CB360. It kept the scrambler recipe of high pipes, braced bars and a raised rear mudguard, but switched to an 18-inch front wheel. It was not a strong seller and was dropped after 1976.
