| MODEL | LAVERDA 350 ALPINO 1978 - 1981 |
| Year | 1978 - 1981 |
| Engine Type | Four stroke, parallel twin cylinders |
| Displacement / Capacity | 344.5 cc / 21 cu in |
| Bore X Stroke | 60 x 61 mm |
| Compression Ratio | 8.7:1 |
| Cooling System | Air cooled |
| Max Power | — |
| Max Torque | — |
| Ignition | Bosch electronic |
| Induction | 2x 24 mm Dell'Orto PHF carburettors |
| Start System | Electric |
| TRANSMISSION SPECS | |
| Lubrication | — |
| Gear Box | 6 Speed |
| Clutch | — |
| Final Drive | Chain |
| CHASSIS SPECS | |
| Frame | — |
| Front Suspension | Marzocchi forks |
| Rear Suspension | Swinging arm, adjustable Marzocchi shock absorbers |
| Front Brakes | 2x 260 mm discs, 2 piston calipers |
| Rear Brakes | Single 260 mm disc, 1 piston caliper |
| DIMENSION SPECS | |
| Overall Length | — |
| Overall Width | — |
| Overall Height | — |
| Seat Height | — |
| Wheelbase | — |
| Ground Clearance | — |
| Dry Weight | 172 kg / 379 lb |
| Wet Weight | — |
| WHEEL SPECS | |
| Front Tyre | 90/90 S18 |
| Rear Tyre | 110/90 H18 |
| FUEL SYSTEM | |
| Fuel Capacity | 14.5 Litres / 3.8 US gal |
| Fuel Consumption | — |
| Top Speed | — |
A cut-down version of the 500 Alpino twin built mainly for Italy, where bikes above 350 cc attracted much higher sales tax. It keeps the 500's frame and twin-cam, four-valve layout but uses a smaller 60 mm bore, lower compression and smaller carburettors. Weight stayed close to the 500, so performance was modest, though it was cheaper and sold better at home than abroad.
