| MODEL | TRIUMPH BONNEVILLE BOBBER 2017 - 2018 |
| Year | 2017 - 2018 |
| Engine Type | Four-stroke, parallel twin, 270 degree crank, SOHC |
| Displacement / Capacity | 1198 cc / 73.1 cu in |
| Bore X Stroke | 97.6 x 80 mm |
| Compression Ratio | 10.0:1 |
| Cooling System | Liquid cooled |
| Max Power | 57.4 kW / 77 hp @ 6550 rpm |
| Max Torque | 105 Nm / 77.4 lb-ft @ 3100 rpm |
| Ignition | Digital |
| Induction | Multipoint sequential electronic fuel injection |
| Start System | Electric |
| TRANSMISSION SPECS | |
| Lubrication | Wet sump |
| Gear Box | 6 speed |
| Clutch | Wet, multi-plate |
| Final Drive | Chain, X-ring |
| CHASSIS SPECS | |
| Frame | Dual tubular steel cradle |
| Front Suspension | Kayaba 41 mm forks, 120 mm / 4.7 in travel |
| Rear Suspension | Kayaba twin shocks, adjustable preload, 120 mm / 4.7 in travel |
| Front Brakes | Single 310 mm disc, 2 piston floating Nissin caliper, ABS |
| Rear Brakes | Single 255 mm disc, 2 piston floating Nissin caliper, ABS |
| DIMENSION SPECS | |
| Overall Length | 2235 mm / 87.9 in |
| Overall Width | 800 mm / 31.5 in |
| Overall Height | 1025 mm / 40.4 in |
| Seat Height | 690 mm / 27.2 in (solo) |
| Wheelbase | 1510 mm / 59.4 in |
| Ground Clearance | — |
| Dry Weight | 228 kg / 502.7 lb |
| Wet Weight | — |
| WHEEL SPECS | |
| Front Tyre | 100/90-19 |
| Rear Tyre | 150/80-16 |
| FUEL SYSTEM | |
| Fuel Capacity | 10.6 Litres / 2.8 US gal / 3.2 Imp gal |
| Fuel Consumption | — |
| Top Speed | — |
Photo: Dennis Bratland, CC BY-SA 4.0, via Wikimedia Commons
Photo: Jiri Sedlacek (Frettie), CC BY-SA 4.0, via Wikimedia Commons
Triumph's factory bobber, built on the Bonneville T120 platform with a stripped, hardtail-look chassis, single adjustable seat, flat bars and 32-spoke wire wheels. The 1200 cc twin got a Bobber-specific tune for strong low-down pull, with ride-by-wire, rain and road modes, switchable traction control and ABS.
