| MODEL | VESPA P80 1981 - 1990 |
| Year | 1981 - 1990 |
| Engine Type | Two stroke, single cylinder |
| Displacement / Capacity | 79 cc / 4.8 cu in |
| Bore X Stroke | — |
| Compression Ratio | — |
| Cooling System | Air cooled with centrifugal fan |
| Max Power | 4.4 kW / 6 hp @ 7000 rpm |
| Max Torque | — |
| Ignition | Flywheel magneto |
| Induction | Rotary valve |
| Start System | Kick start |
| TRANSMISSION SPECS | |
| Lubrication | — |
| Gear Box | — |
| Clutch | Oil bath, multi plate |
| Final Drive | Direct drive |
| CHASSIS SPECS | |
| Frame | Pressed sheet steel, streamlined monocoque structure |
| Front Suspension | Trailing arm, coil spring, damper |
| Rear Suspension | Coil spring, damper |
| Front Brakes | 150 mm drum |
| Rear Brakes | 150 mm drum |
| DIMENSION SPECS | |
| Overall Length | — |
| Overall Width | — |
| Overall Height | — |
| Seat Height | — |
| Wheelbase | — |
| Ground Clearance | — |
| Dry Weight | — |
| Wet Weight | — |
| WHEEL SPECS | |
| Front Tyre | 3 x 10 in |
| Rear Tyre | 3 x 10 in |
| FUEL SYSTEM | |
| Fuel Capacity | 8.0 Litres / 2.1 US gal |
| Fuel Consumption | — |
| Top Speed | — |
The P80 was the small-capacity, 79 cc version of the large-frame Vespa, aimed at markets with engine-size restrictions. It uses a rotary-valve air-cooled two-stroke with drum brakes front and rear. It sat below the 125 and 150 in the range as a cheap, simple commuter.
