English Français Italiano Español Deutsch Nederlands العربية

Home › Rider Rules › Riding skills › Moving off and low-speed turns

Riding skills · 5 of 9

Moving off and low-speed turns: Observation, signalling and a clean corner at a junction

This exercise copies a real junction: pull away, turn, stop at the line, then pull away and turn again. It tests your observation habits as much as your balance.

StartLook, signal, then turnStop line
Moving off and turning at a junction: stay between the lines and stop on the line.

1. Moving off

  1. Select first gear.
  2. Find the clutch biting point.
  3. Check your mirrors, then look over both shoulders.
  4. Release the clutch gently and add throttle to pull away.
  5. Change into second gear once you are rolling.

2. The turn

  1. Check your blind spot on the side you are turning towards.
  2. Signal.
  3. Check the blind spot again just before the corner.
  4. Lean the bike smoothly through the turn and keep within your lane or the marked lines.
  5. Cancel the indicator once the bike is upright again.

3. Stopping at the line

  1. Signal your intention to stop with your indicator and brake light.
  2. Brake evenly with both brakes and stop with the front wheel on the line.

4. Pulling away again

  1. Select first gear and return to the biting point.
  2. Check mirrors and both blind spots again.
  3. Move off, then repeat the turn checks and signal for the next corner.

Tip: Turn your head deliberately, and make sure an examiner or instructor can see your helmet move. Keep your eyes up, looking where you want to go. Practise turns in both directions.