English Français Italiano Español Deutsch Nederlands العربية

Home › Rider Rules › Riding skills › Starting and stopping the engine

Riding skills · 3 of 9

Starting and stopping the engine: A fixed order avoids lurching and rolling

Do these in the same order every time. The most common beginner mistake is starting the engine in gear and having the bike lurch forward.

Starting

  1. Turn the fuel tap on if your bike has one (mainly older or carburettor bikes).
  2. Switch the ignition on and check the dash lights up and the warning lights behave normally.
  3. Make sure the gearbox is in neutral and the green N light is on.
  4. Set the engine kill switch to RUN.
  5. Use the choke for a cold engine if your bike has one.
  6. Press the starter, or use the kick-start.
  7. Release the starter as soon as the engine fires, or let the kick-start return smoothly.
  8. Cancel the choke once the engine idles smoothly and warms up.

Tip: Always double-check the neutral light. If you are not sure, pull in the clutch lever before pressing the starter.

Stopping

  1. Switch off any accessories, including auxiliary and headlights where they are switched.
  2. Use the kill switch to stop the engine.
  3. Turn the ignition key off.
  4. Turn the fuel tap off if there is one, to prevent leaks and flooding.
  5. Select first gear when you park. On a slope it acts as a parking brake.