Cornering: Slow before the bend, look through it, hold your line
Running wide in a corner is one of the most common causes of motorcycle crashes. Good cornering is mostly about speed judgement and looking in the right place.
The routine
- Look all round before you start.
- Move off smoothly and change up.
- Judge the bend and set your speed before you lean. Brake while the bike is upright.
- Look through the bend to where you want to go, not at the ground in front of you.
- Keep a smooth line inside your lane or marked area and roll the throttle on gently.
- Exit the corner and stop under control, staying inside the markings.
Tips
- If you feel yourself running wide, look further ahead and keep leaning. Do not grab the brakes mid-corner.
- On a practice track, ride briskly but steadily. If you are too slow the exercise teaches nothing, and too fast puts you off your line.
- Repeat in the opposite direction. Most riders have a stronger side.
Tip: Practise on a clean, dry surface. Wet paint markings, oil and sand reduce grip dramatically.