English Français Italiano Español Deutsch Nederlands العربية

Home › Rider Rules › Riding skills › Hill start

Riding skills · 7 of 9

Hill start: Pull away uphill without rolling back or spinning the rear wheel

A hill start tests your clutch and throttle control. Rolling backwards is the one thing to avoid.

Never roll backClutch at the biting point,ease the brake, add throttle
Hill start: hold on the rear brake, find the biting point, then release the brake as you add throttle.

Stopping on the slope

  1. Stop where you intend to, in first gear.
  2. Hold the bike on the rear brake with your right foot. Your right hand stays free for the throttle.

Preparing to move off

  1. Check your mirrors and the appropriate blind spot.
  2. Signal if your situation requires it.
  3. Slowly bring the clutch lever out to the biting point and hold it there.
  4. Do a full look-around to make sure it is safe.

Pulling away

  1. Add a little throttle while you ease off the rear brake and clutch together.
  2. As the bike moves forward, put both feet on the footrests straight away.
  3. Accelerate smoothly to clear the slope.
  4. Cancel the indicator.

Common faults

  • Rolling back, even slightly, means you let go of the brake too early.
  • Spinning the rear wheel means too much throttle or a rushed clutch.
  • Lifting the front wheel means too much throttle: be smooth.